Guide to LED lighting

Light emitting diodes or LED lighting must be the best lighting so far since it saves energy and a very smart solution compared to the other methods of illumination that you can find in the market today.

In LED lighting, diodes are used using DC circuits to emit light that extends battery life that is used for flashlights and other light emitting gadgets like cellphones, and other. it then included vehicular headlights by using specially designed reflectors, intensifying its brightness and the length of its coverage while still maintaining its efficiency. Today, it is now possible to run LED lighting from an AC supply that offers several advantages. So what once are usually considered to be for DC devices operating from a few volts (of direct current) can now be used for a more robust application that requires the same amount of voltage – like those linear strip-lightning systems around the outside of a building stretching for one hundred meters. Since DC drives suffer power loss over distance it then brings a different consideration. And in order to maintain the voltage there is now a need to use a higher drive voltage when the voltages start to drop and so additional regulators are needed. This is not necessary if you have AC or alternative current since it main maintain voltage despite distance. This has always been the problem with DC power and it is the reason why we don’t use it to transmit power across our streets and cities.

Today running LED lighting from an AC supply means converting your AC supply to produce DC power to operate your LED lights. And several options came to do that. Today transformers are used to provide the required DC violated for many stand alone fixtures. And there are a number of companies that provide LED light bulbs that screw directly into standard sockets, but these invariably also contain miniaturized circuitry that converts AC to DC before delivering it to the LEDs. The upfront costs of these LED lighting are very expensive. Despite the high upfront cost you can expect a remarkable decrease in your power bill in the long run.

The Christmas tree light approach was an early for of this type of lighting. In this approach multiple LED lights are connected in series so that voltage drop across the whole siring equal the supply voltage.

There are however attempts to develop ‘true’ AC-LEDs but right now we have to contend ourselves on this big leap in technology that can be seen as an upgrade from analog to digital. The advantages of LED lighting over conventional lighting are so great that it will not only benefit the user but the planet as well.